OWC Mercury Elite Pro Dual Assembly Manual & User Manual page 9

7. The inner chassis can fit into either end of the outer enclosure, but only one end
works for the assembly process. To determine the correct end, turn the outer
enclosure on its side and look at the bottom. As shown below, the screw holes at
the front of the outer enclosure are close to the silicone feet. The screw holes at
the rear of the outer enclosure are farther away from the silicone feet.
REAR
MERCURY ELITE PRO DUAL
8. Once you have determined the
correct side for inserting the inner
chassis, slide it back into the outer
enclosure, as shown at left.
7
FRONT
DEVICE SETUP