EGR-5000
Quick Start Guide
5.1
Setting the Basic System Parameters
EGR-5000 Quick Start Guide
First, set up the basic System Parameters
by double clicking on the "System Para" as
shown to the left then double click on
"Generator." This will result in the "System
Para/Generator" dialog box shown. When
the User double clicks on a parameter within
the dialog box, an interface appears that will
allow the parameters to be modified.
For example, to modify the Generator MVA
Parameter, double click "Generator MVA".
This will result in the screen displayed to the
left. The pull-down menu will allow the User
to change the Generator MVA setting.
Note that when a value has been
changed, it has NOT yet been saved.
The "Previous" and "Next" buttons can be
used to display the Previous and Next
parameters within the "System
Para/Generator" dialog box.
Effective November 2011
29