EGR-5000
Quick Start Guide
Section 6:
Assigning/Mapping Relay Outputs Using PowerPort-E
Either create a new parameter file or open
and existing parameter file for the device
(see Section 5 for details). Note that to load
parameters from the device the User may
need to set up the connection to the device
through the "Settings -> Connection
Settings" pull-down menu (see Section 5 for
details).
The upper left portion of the PowerPort-E
screen should now display:
Operation;
•
System Para (Parameters);
•
Protection Para (parameters);
•
Device Para (Parameters);
•
System A (Alarms);
•
Control;
•
Logics;
•
Device Planning; and
•
Service.
•
Double click on "Device Parameters" then
"Relay Outputs". This will display the
available relay cards.
38