Table of Contents
Advertisement
EGR-5000
Quick Start Guide
Table 1.
Arrows and Tools That Can Appear in the Function Area of the Display.
Arrow/Tool
Description
The "Up" arrow scrolls up through the current menu.
The "Down" arrow scrolls down through the current menu.
The "Left" arrow takes the User one step back to the previous menu.
The "Right" arrow takes the User to the next sub-menu.
The "Top of List" arrow takes the User directly to the top of the current menu list.
The "Bottom of List" arrow takes the User directly to the bottom of the current menu list.
The "Increase" icon will increase the active digit by one.
The "Decrease" icon will decrease the active digit by one.
The "Left Movement" arrow will take the User one digit to the left in a value.
The "Right Movement" arrow will take the User one digit to the right in a value.
The "Wrench" icon will give the User access to the parameter setting mode for a function.
The "Delete" icon allows the User to delete data or a value.
1.2
Password Entry
Before any parameter of the EGR-5000 can be changed, the User must enter a valid password using the soft keys
on the control panel. A password must be a User-defined, four digit combination of the numbers 1, 2, 3, and 4
(examples: 1224 or 2341).
Note:
A default password (1234) was set at the factory. If the password has been changed, contact your System
Administrator for the new password.
To enter the password, simply press the soft keys corresponding with the numbers appearing in the function area
near the bottom of the LED display. An asterisk (*) will appear in the display as each number is entered.
Press the "OK" soft key after the password has been entered.
Password
Numbers
Figure 3. Entering the Password.
4
Soft Keys
"OK" Key
Advertisement
Table of Contents
