Table of Contents
Advertisement
EGR-5000
Quick Start Guide
EGR-5000 Quick Start Guide
Use the up or down
arrow keys to set
the desired "f" to
"50 Hz" or "60 Hz".
Press the "OK" soft
key to save the
setting.
If the parameter has
been changed and
after the User
presses the "OK"
soft key, an asterisk
will appear next to
the changed
parameter.
To save the
parameter change,
press the "OK" soft
key again (see
Section 2: Saving
Parameters.
Use the left arrow
key to move back to
the "System Para"
main menu. Use
the up or down
arrow keys to select
the "Direction"
parameter then
press the right
arrow key.
Use the up or down
arrow keys to
highlight the "Phase
MTA" (Maximum
Phase Angle)
parameter then
press the soft key
under the wrench
icon.
To edit parameters,
the User must enter
a valid password
(see Section 1:
Password Entry).
Effective November 2011
13
Advertisement
Table of Contents
