Eaton EGR-5000 Quick Start Manual page 15

EGR-5000
Quick Start Guide
EGR-5000 Quick Start Guide
Use the up or down
arrow keys to return
to the "System
Para" main menu
then use the up and
down arrow keys
again to highlight
the "System Para –
General Settings"
menu. Press the
right arrow key then
use the up and
down arrow keys
again to select the
"CT pri" (CT
Primary). Press the
right arrow key.
Enter the desired
CT setting using the
soft keys. When
the appropriate
setting is displayed,
follow the same
procedure to
change the setting:
wrench ->
select/change value
-> soft key under
"Ok".
If the parameter has
been changed and
after the User
presses the "OK"
soft key, an asterisk
will appear next to
the changed
parameter.
To save the
parameter change,
press the "OK" soft
key again (see
Section 2: Saving
Parameters.
Effective November 2011
15