Eaton EGR-5000 Quick Start Manual page 31

EGR-5000
Quick Start Guide
EGR-5000 Quick Start Guide
Close the "System Para/Generator" dialog
box by clicking on the "X" at the right top
corner of the box. Double click on "General
Settings" in the "System Para" menu. The
"System Para/General Settings" dialog box,
shown to the left, will appear.
Double click on "Phase Sequence" in the
"System Para/General Settings" dialog box
and the screen shown to the left will appear.
The pull-down menu in this screen allows
the User to change the Phase Sequence
setting. Once the desired Phase Sequence
has been selected, click on the "OK" button.
An asterisk will appear next to the modified
parameter.
To change the "f" (Frequency) setting,
double click on "f" in the "System
Para/General Settings" dialog box and the
screen shown to the left will appear.
The drop-down menu in this screen allows
the User to change the "f" (Frequency)
setting. The User can choose 50 or 60 Hz
for the setting. Once the desired frequency
has been selected, click on the "OK" button.
An asterisk will appear next to the modified
parameter.
Effective November 2011
31