Table of Contents
Advertisement
EGR-5000
Quick Start Guide
Section 2:
Saving Parameters
When the User makes changes to the parameters, the EGR-5000 DOES NOT automatically save the changes.
Changes MUST BE explicitly saved by the User. There are two ways changes can be saved: saving individual
changes or saving multiple changes.
2.1
Making and Saving Parameter Changes
1. Use the soft keys under the display to access the parameter to be changed.
2. Press the soft key under the wrench icon then enter the password.
3. Use the soft keys to change the parameter then press the soft key under "OK". Asterisks appears in the
display indicating a parameter has been changed.
Figure 5. The "OK" Soft Key and the Asterisk Denoting a Parameter Change.
EGR-5000 Quick Start Guide
Figure 4.
The Wrench Icon.
Wrench Icon
"OK" Key
Asterisks
Effective November 2011
5
Advertisement
Table of Contents
