EGR-5000
Quick Start Guide
Congratulations! You have successfully completed the basic device Relay Output assigning/mapping
using the front panel soft keys. You can now set the rest of the device parameters for your specific
application.
To block a
protective function
to operate the
"Bkr.TripCmd",
activate the block
function under the
active setting group.
In order to trip only
for a particular
function, select
"27M[1].Trip". DO
NOT select
"27M[1].TripCmd"
as this signal can
be blocked.
Once the
assignments and
settings are made,
press the "OK" soft
key twice then
select the soft key
under "Save" to
save the settings.
26