Eaton EGR-5000 Quick Start Manual page 18

EGR-5000
Quick Start Guide
Use the up or down
arrow keys to
highlight the "40-
Z1(1) Function"
parameter then
press the soft key
under the wrench
icon.
To edit parameters,
the User must enter
a valid password
(see Section 1:
Password Entry).
Use the up or down
arrow keys to select
"Active" or "Inactive"
then press the "OK"
soft key.
If the parameter has
been changed and
after the User
presses the "OK"
soft key, an asterisk
will appear next to
the changed
parameter.
To save the
parameter change,
press the "OK" soft
key again (see
Section 2: Saving
Parameters.
18