Bench-Top Power Tool Use And Care; Service - MasterCraft 055-6715-4 Owner's Manual

BENCH-TOP POWER TOOL SAFETY
PERSONAL SAFETY – cont'd
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.

Bench-top power tool use and care

Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing
accessories, cleaning, or storing power
tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
Each time the tool is used, make sure the
guards are in place and working properly.
SAVE THESE INSTRUCTIONS FOR REFERENCE
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
Use only accessories that are recommended
for the tool. Consult your Owner's Manual for
recommended accessories. The use of improper
accessories may cause risk of injury.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Use clamps or another practical way to
secure and support the workpiece. Holding
the workpiece by hand or against your body
leaves it unstable and may lead to loss of
control.
Never stand on a power tool. Serious injury
could result if the tool tips or is accidentally hit.
Do NOT store anything above or near a power
tool.

Service

Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
6