Page 6
II. General safety guidelines(continued) 40.Make sure that the turn base is properly secured so it will not move during operation. 41.For your safety, remove the chips, small pieces, etc. from the tabletop before operation. 42.To avoid cutting nails, inspect workpiece and remove all nails from the before operation. 43.Make sure the shaft lock is released before the switch is turned on.
Page 7
II. General safety guidelines(continued) • Lead from lead-based-painted material and; • Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.