Related Manuals for MasterCraft 055-6740-2
Summary of Contents for MasterCraft 055-6740-2
- Page 1 055-6740-2 SLIDING WET TILE SAW INSTRUCTION IMPORTANT: MANUAL Please read this manual carefully before using this wet tile saw and save it for reference.
- Page 2 TABLE OF CONTENTS SpecificationS General Safety GUiDelineS Specific Safety GUiDelineS for the SliDinG wet tile Saw electrical information Key partS DiaGram aSSembly inStrUctionS operatinG inStrUctionS maintenance partS liSt warranty NOTE: if any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-800-689-9928.
- Page 3 055-6740-2 | contact us 1-800-689-9928 SPECIFICATIONS Safety is a combination of common sense, staying alert, and knowing how the tile saw works. 1. READ and become familiar with this Instruction Manual. LEARN the tool’s applications, limitations, and motor 120 V ac, 60 hz, 10a possible hazards.
- Page 4 055-6740-2 | contact us 1-800-689-9928 15. MAKE THE WORKSHOP CHILDPROOF. Use padlocks and master switches, and ALWAYS remove 1. Check for proper assembly and proper alignment of moving parts. starter keys. 2. Always use the blade guard assembly.
- Page 5 055-6740-2 | contact us 1-800-689-9928 GROUNDING INSTRUCTIONS GUIDELINES FOR USING EXTENSION CORDS IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for Verify that the extension cord is in good condition. when using an extension cord, be sure to use one that electric current, and reduces the risk of electric shock.
- Page 6 055-6740-2 | contact us 1-800-689-9928 UNPACKING (Fig. 1) Description Description water tubing Drain plug 1. Carefully remove the contents from the box. handle worktable 2. Do not discard the box or the packing material until all parts have been carefully inspected and...
- Page 7 055-6740-2 | contact us 1-800-689-9928 ASSEMBLY INSTRUCTIONS Changing the blade (Fig. 6 to 7) this wet tile saw requires some assembly. for safety this saw accepts blades with a 7/8” arbor. if using blades Fig. 2 reasons, the wet tile saw must be completely assembled with a 5/8”...
- Page 8 055-6740-2 | contact us 1-800-689-9928 Adding water ON/OFF switch (Fig. 9 and 10) (Fig. 11) Fig. 9 Fig. 11 1. Verify that the drain plug (1) is in the drain opening on press the switch (1) to the ON (i) position in order to start the tray.
- Page 9 055-6740-2 | contact us 1-800-689-9928 Making a 45°cut Lubrication (Fig. 13) Fig. 13 follow these steps in order to cut a tile at a 45° angle: mastercraft ® tools are properly lubricated at the factory, and are ready to use. when necessary, use a dry silicone spray to lubricate parts that pivot or move.
- Page 10 055-6740-2 | contact us 1-800-689-9928 MASTERCRAFT 7” (17.8 cm) SLIDING WET TILE SAW ® Description Description when servicing the mastercraft ® Sliding wet Saw, use only identical replacement parts. the use of any other worktable (a) hex bolt m6 x 30 parts may cause damage to the product.
- Page 11 3-Year Limited Warranty ® this mastercraft product is guaranteed for a period of 3 years from the date of original retail purchase against defects in workmanship and materials, except for the following component: Component A: Accessories, which are guaranteed for a period of 1-year from the date of original retail purchase against defects in workmanship and materials.
- Page 12 055-6740-2 | contact us 1-800-689-9928 model no. 055-6740-2 | contact us 1-800-689-9928 Additional Limitations this warranty applies only to the original purchaser and may not be transferred. neither the retailer nor the manufacturer shall be liable for any other expense, loss or damage, including, without limitation, any indirect, incidental, consequential or exemplary damages arising in connection with the sale, use or inability to use this product.