25/32" (2 cm) @ 45° Weight: 22 lb 13 oz (10.4 kg) Need assistance? Call us on our toll-free customer support line: 1-800-689-9928 Technical questions Replacement parts Parts missing from package Imported by Mastercraft Canada Toronto, Canada M4S 2B8...
GENERAL SAFETY WARNINGS WARNING: Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible situations. It must be understood that common sense and caution are factors which cannot be built into the product.
GENERAL SAFETY WARNINGS WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT. WARNING: Dust that is created by power sanding, sawing, grinding, drilling, and other construction activities may contain chemicals that are known to cause cancer, birth defects, or other genetic abnormalities.
BENCH-TOP POWER TOOL SAFETY Do not abuse the cord. Never use the cord WARNING: Read all safety warnings for pulling or unplugging the power tool. and instructions. Failure to follow the warnings Keep cord away from heat, oil, sharp edges and instructions may result in electric shock, fire or moving parts.
BENCH-TOP POWER TOOL SAFETY PERSONAL SAFETY – cont’d Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting Dress properly. Do not wear loose clothing edges are less likely to bind and are easier to or jewelry. Keep your hair, clothing and control.
SCROLL SAW SAFETY Never stand on the tool. Serious injury could WARNING : Know your scroll saw. Do occur if the tool is tipped or if the blade is not plug in the scroll saw until you have read and understand this Owner’s Manual. Learn unintentionally contacted.
SCROLL SAW SAFETY Always make sure the work surface is free of Turn the switch OFF, remove the switch key nails and other foreign objects. Cutting into a and make sure the saw has come to a complete nail can cause the blade to jump or break. stop before installing or removing a blade, and before leaving the work area.
EXTENSION CORD SAFETY WARNING: Keep the extension cord WARNING: Keep the extension cord clear of the working area. Position the cord clear of the working area. Position the cord so so it will not get caught on the workpiece, it will not get caught on the workpiece, tools or tools or any other obstructions while you are any other obstructions while you are working working with the power tool.
SYMBOLS WARNING: Some of the following symbols may appear on the scroll saw. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool. Direct current Volts No load speed Amperes Alternating or direct current...
ASSEMBLY AND INSTALLATION Place a flat washer on new 1/4" (6 mm) NOTE: The drawings in the assembly and bolts long enough to go through the work operating section of this manual may surface, vibration dampening feet and the differ slightly from the tool you purchased. saw base.
ADJUSTING THE SCROLL SAW LED WORK LIGHT The LED worklight has a flexible connection (1) that allows you to position the work light so it illuminates the workpiece where it is being cut (Fig. 3). The work light will automatically turn ON when the saw switch (2) is turned ON and will automatically turn OFF when the saw switch is turned OFF.
ADJUSTING THE SCROLL SAW INSTALLING A NEW BLADE A blade should be replaced if it is dull, bent or broken. Turn the scroll saw switch OFF and remove the plug from the power source. NOTE: Do NOT touch the blade immediately after use.
ADJUSTING THE SCROLL SAW ADJUSTING THE WORKPIECE HOLD-DOWN FOOT The workpiece hold-down foot must be used and properly adjusted to prevent the workpiece from jumping. An improperly adjusted hold-down foot will result in poor control over the workpiece, rough cuts and possibly broken blades.
OPERATING THE SCROLL SAW When the switch if in the OFF position, pull the key (2) out of the switch toggle and place it where children and unauthorized WARNING people cannot find it. When the key is For safety reasons, the operator must removed, the switch will not turn the scroll read the sections of this Owner’s Manual saw ON.
MAINTENANCE OPERATING THE SCROLL SAW GENERAL ALIGNING THE BEVEL INDICATOR – cont’d WARNING: When servicing, use only identical replacement parts. The use of any other part may create a hazard or cause product damage. DO NOT use solvents when cleaning plastic parts.
PARTS LIST ® WARNING: When servicing, use only Mastercraft replacement parts. The use of any other parts may create a safety hazard or cause damage to the scroll saw. Any attempt to repair or replace electrical parts on this scroll saw may create a safety hazard unless repairs are performed by a qualified technician.
Page 20
PARTS LIST Key # Part # Part Name Quantity SBS16B-36 Screw SBS16B-37 Flat washer SBS16B-38 Spring washer SBS16B-39 Blade SBS16B-40 Rubber sleeve SBS16B-41 Plastic table insert SBS16B-42 Table SBS16B-43 Frame support SBS16B-44 Flat washer SBS16B-45 Spring washer SBS16B-46 Screw SBS16B-47 Bevel adjustment pointer SBS16B-48 Bevel pin...
Page 21
PARTS LIST Key # Part # Part Name Quantity SBS16B-71 Motor SBS16B-72 Switch box plate SBS16B-73 Switch box SBS16B-74 Switch plate SBS16B-75 Switch SBS16B-76 Flat washer SBS16B-77 Tapping screw SBS16B-78 Cord set SBS16B-79 Strain relief SBS16B-80 Cable clamp SBS16B-81 Screw SBS16B-82 Ground terminal SBS16B-83...
Three-Year Limited Warranty This Mastercraft product is guaranteed for a period of three years from the date of original retail purchase against defects in workmanship and materials, except for the following components: Component A: Batteries, chargers and carrying cases, which are guaranteed for a period of two years from the date of original retail purchase against defects in workmanship and materials;...
Page 23
Mastercraft is a superior line of products selected for their workmanship and materials. These products are designed to meet rigorous quality and performance standards, and are approved by our Quality Assurance laboratory.