Table of Contents
Advertisement
CHAPTER 3
VMA SAN Gateway Management Overview
AM456-9025A
VMA SAN Gateway Management and
Configuration
This chapter covers VMA SAN Gateway configuration and management tasks and
includes the following topics:
VMA SAN Gateway Management Overview
•
Prerequisites
on page 32
•
Configuring Interface Bonding
•
Gateway Network Configuration Guidelines
•
Managing a Redundant Gateway Pair
•
You can group together redundant HP VMA SAN Gateway pairs and connected HP
VMA-series Array nodes into a management group to create a virtual system that
can be managed and monitored as a single unit. A SAN Gateway management
group consists of one or two HP VMA SAN Gateway nodes, designated as follows:
• Master node: The first node added to a cluster becomes the active master
node. For more information, see
Master/Standalone Node
A standalone SAN Gateway is a single node cluster, configured as a
Note:
master node.
• Secondary node: The second node in a cluster becomes the secondary node.
Should the master node fail, the secondary node automatically becomes the
master node through which management traffic is redirected. For more
information, see
Configuring a Secondary HP VMA SAN Gateway Node
page 27.
HP VMA SAN Gateway Installation and Configuration Guide
on page 31
on page 32
on page 36
on page 37
Configuring a HP VMA SAN Gateway
on page 23.
on
33
Advertisement
Table of Contents
