HP VMA SAN Installation And Configuration Manual page 27

Enter a value or press the Enter key to accept the default value shown in square brackets (if
4.
one is present).
Step 2: Public interface name? [eth1]
Step 3: Public interface IP address? [10.1.14.200]
Step 4: Public interface netmask? [255.255.252.0]
Step 5: Global default gateway? [10.1.12.1]
Step 6: DNS server name(s)? [10.1.12.5]
Step 7: Domain name? [my.storageco.int]
Step 8: Hostname? [my-gateway1]
Step 9: Set clock timezone? [yes]
Step 10: Zone to use? [America]
Step 11: Sub-zone 1 to use? [North]
Step 12: Sub-zone 2 to use? [United_States]
Step 13: Sub-zone 3 to use? [Pacific]
Step 14: NTP server name(s)? [10.1.1.5,10.1.12.5]
Step 15: Email Notification recipient(s)? [admin@mystorageco.com]
Step 16: Email mailhub? [10.1.6.20]
Step 17: Email mailhub port? [25]
Step 18: Enable Violin support? [yes]
Step 19: Admin password (Enter to leave unchanged)?
Step 20: Cluster interface name? [eth1]
Step 21: Cluster expected nodes? [1]
Step 22: Cluster id? [99999-9999-1107]
Step 23: Cluster name? [gateway-cluster1]
Step 24: Cluster mgmt IP address and masklen? [0.0.0.0]
VLAN and interface bonding configuration as used for configuration of a redundant
Note:
gateway pair is not part of the configuration wizard must be configured using the CLI. For
information on how to set up bonding and configure a VLAN, see the
Process Guide
After you complete the questions, the configuration wizard displays your responses and
5.
prompts you to press Enter to accept and save the settings:
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
AM456-9025A
.
█
HP VMA SAN Gateway Installation and Configuration Guide
Redundant Gateway Pairing
27