Verifying Vshare And Other Licenses - HP VMA SAN Installation And Configuration Manual

The following table lists the recommended software and settings for optimum performance of the
VMA Gateway Web Interface.
Recommendation
Display resolution
JavaScript
Adobe Flash Player
Cookies
Table 2.4 Recommended for the VMA Gateway Web Interface
Accessing the VMA Gateway Web Interface
You must use a supported browser with JavaScript and cookies enabled, as described in
Web Browsers
To access the VMA Gateway Web Interface, do the following:
Open a (supported) browser window.
1.
Enter the following URL in the address field, substituting the variable in <brackets> with the
2.
actual value for your system.
http://<Gateway_IP_address_or_hostname>
The log in page appears.
Log in as admin user.
3.
For more information, see the HP VMA SAN Gateway User's Guide.

Verifying vSHARE and Other Licenses

This section demonstrates how to verify that vSHARE and other installed licenses are active on the
HP VMA SAN Gateway.
To verify the vSHARE and other installed licenses, do the following:
Log in to the master node as admin and enter enable mode.
1.
login as: admin
{cluster: master} > enable
#
AM456-9025A
The minimum recommended display resolution for the
VMA Web Interface is 1024 by 768 pixels.
JavaScript must be enabled for the VMA Gateway Web
Interface.
Adobe Flash Player version 8 (or above) is required for
viewing charts in the VMA Gateway Web Interface.
Enable cookies for login and session management. Cookies
are also used to store dashboard page settings.
on page 28.
HP VMA SAN Gateway Installation and Configuration Guide
Description
Supported
31