HP VMA SAN Installation And Configuration Manual page 55

Fibre Channel initiator identifiers (WWN) are fixed by the HBA port. If you want to restrict
LUN access to a particular initiator, you must get the appropriate the WWN from the Fibre
Channel HBAs on the client machine.
To verify that the initiators were added to the initiator group, return to the CLI and enter the
4.
show igroups
(config) # exit
# show igroups
Initiator group: <my_igroup> #Initiators: 2
wwn.21:00:00:1b:32:9a:18:65
wwn.21:01:00:1b:32:ba:18:65
show igroups
The
group, and the WWN of those initiators.
igroup create Command
igroup create
The
Channel initiators. Fibre Channel initiator identifiers (WWNs) are generated automatically by an
HBA.
Syntax
[no] igroup create name <name>
Syntax Description
name
Examples
The following examples demonstrate how the
initiator groups and initiators.
The following command creates an initiator group named FINANCE:
igroup create name FINANCE
The Cisco-style
example, the command deletes the igroup FINANCE.
no igroup create name FINANCE
AM456-9025A
command.
command shows all initiator groups, the number of initiators within each
command creates an initiator group and, optionally, one or more Fibre
The name is alphanumeric only.
no
prefix may be used to delete initiator groups or initiators. In the following
HP VMA SAN Gateway Installation and Configuration Guide
igroup create
command can be used to manage
55