Cluster - TP-Link TL-SL3428 User Manual

PVFR"Rqtv"Fgnc{<"
Rqtv"Eqphki"
"
Ugngev<"
Rqtv<"
PVFR<"
Gpcdng<"
Fkucdng<"
Pqvg<"
NTDP function is effective only when NTDP function is enabled globally and for the port.
3505"Enwuvgt"
A commander switch can recognize and add the candidate switch to a cluster automatically based
on NDP and NTDP. You can manually add the candidate switch to a cluster. If the candidate switch
is successfully added to the cluster, it will get a private IP address assigned by the commander
switch. You can manage and configure the member switch via the commander switch.
The Cluster function can be implemented on Enwuvgt"Uwooct{"and Enwuvgt"Eqphki"pages.
350503" Enwuvgt"Uwooct{"
On this page you can view the status of the current cluster.
Choose the menu"Enwuvgt→Enwuvgt→Enwuvgt"Uwooct{"to load the following page.
For a candidate switch, the following page is displayed:

The following entries are displayed on this screen:
Inqdcn"
"
Enwuvgt<"
Enwuvgt"Tqng<"
For a member switch, the following page is displayed:

Enter the time between the port forwarding NTDP request packets
and its adjacent port forwarding NTDP request packets over. The
default is 20 milliseconds.
Select the desired port for NTDP status configuration.
Displays the port number of the switch.
Displays NTDP status (enabled or disabled) of the current port.
Click the Enable button to enable NTDP feature for the port you
select.
Click the Disable button to disable NTDP feature for the port you
select.
Figure 13-9 Cluster Summary for Candidate Switch
Displays the cluster status (enabled or disabled) of the switch.
Displays the role the switch plays in the cluster.
191