Port Config - TP-Link TL-SL3428 User Manual

The following entries are displayed on this screen:
Inqdcn"Eqphki"
"
Xqkeg"XNCP<"
XNCP"KF<"
Cikpi"Vkog<"
;0504"Rqtv"Eqphki"
Before the voice VLAN function is enabled, the parameters of the ports in the voice VLAN should
be configured on this page.
Choose the menu"SqU→Xqkeg"XNCP→Rqtv"Eqphki"to load the following page."
Figure 9-12 Global Configuration
Select Enable/Disable Voice VLAN function.
Enter the VLAN ID of the voice VLAN.
Specifies the living time of the member port in auto mode after the
OUI address is aging out.
Figure 9-13 Port Config
120