TP-Link TL-SL3428 User Manual page 182

The following entries are displayed on this screen:
Eqoowpkv{"Eqphki"
"
Eqoowpkv{"Pcog<"
Ceeguu<"
OKD"Xkgy<"
Eqoowpkv{"Vcdng"
"
Ugngev<"
Eqoowpkv{"Pcog<"
Ceeguu<"
OKD"Xkgy<"
Qrgtcvkqp<"
Pqvg<" "
The default MIB View of SNMP Community is viewDefault.
Eqphkiwtcvkqp"Rtqegfwtg<"
If SNMPv3 is employed, please take the following steps:

Uvgr" Qrgtcvkqp"
1 Enable UPOR function globally.
2 Create SNMP View.
3 Create SNMP Group.
4 Create SNMP User.
Enter the Community Name here.
Defines the access rights of the community.

tgcf/qpn{< Management right of the Community is
restricted to read-only, and changes cannot be made to
the corresponding View.

tgcf/ytkvg< Management right of the Community is
read-write and changes can be made to the corresponding
View.
Select the MIB View for the community to access.
Select the desired entry to delete the corresponding Community.
It is multi-optional.
Displays the Community Name here.
Displays the right of the Community to access the View.
Displays the Views which the Community can access.
Click the Edit button to modify the MIB View and the Access
right of the Community, and then click the Oqfkh{ button to
apply.
Fguetkrvkqp"
Required. On the UPOR→UPOR" Eqphki→Inqdcn"
Eqphki page, enable UPOR function globally.
Required. On the UPOR→UPOR" Eqphki→UPOR"
Xkgy page, create SNMP View of the management
agent. The default View Name is viewDefault and the
default OID is 1.
Required. On the UPOR→UPOR" Eqphki→UPOR"
Itqwr page, create SNMP Group for SNMPv3 and
specify SNMP Views with various access levels for
SNMP Group.
Required. On the UPOR→UPOR" Eqphki→UPOR"
Wugt" page, create SNMP User in the Group and
configure the auth/privacy mode and auth/privacy
password for the User.
174