User Management - TP-Link TL-SL3428 User Manual

Ocpcigogpv"XNCP<
KR"Cfftguu<"
Uwdpgv"Ocum<"
Fghcwnv"Icvgyc{<"
Pqvg<"
1. Changing the IP address to a different IP segment will interrupt the network communication,
so please keep the new IP address in the same IP segment with the local network.
2. The switch only possesses an IP address. The IP address configured will replace the original
IP address.
3. If the switch gets the IP address from DHCP server, you can see the configuration of the
switch in the DHCP server; if DHCP option is selected but no DHCP server exists in the
network, the switch will keep obtaining IP address from DHCP server until success.
4. If DHCP or BOOTP option is selected, the switch will get network parameters dynamically
from the Internet, which means that its IP address, subnet mask and default gateway cannot
be configured.
5. The default IP address is 192.168.0.1.
604" Wugt"Ocpcigogpv"
User Manage functions to configure the user name and password for users to log on to the Web
management page with a certain access level so as to protect the settings of the switch from being
randomly changed.
The User Management function can be implemented on Wugt"Vcdng and Wugt"Eqphki pages.
60403"Wugt"Vcdng"
On this page you can view the information about the current users of the switch.
Choose the menu"U{uvgo→Wugt"Ocpcigogpv→Wugt"Vcdng to load the following page.
60404"Wugt"Eqphki"
On this page you can configure the access level of the user to log on to the Web management
page. The switch provides two access levels: Guest and Admin. The guest only can view the
Enter the ID of management VLAN, the only VLAN through which
you can get access to the switch. By default VLAN1 owning all the
ports is the Management VLAN and you can access the switch via
any port on the switch. However, if another VLAN is created and
set to be the Management VLAN, you may have to reconnect the
management station to a port that is a member of the
Management VLAN.
Enter the system IP of the switch. The default system IP is
192.168.0.1 and you can change it appropriate to your needs.
Enter the subnet mask of the switch.
Enter the default gateway of the switch.
Figure 4-8 User Table
17