▶ Press the torque selector button as many times as necessary until the
desired torque setting is indicated to the left of the button.
SID 14A
SID 18A
Model SID ... (SID 14A OR SID 18A) → Seite 9
SIW 14A
SIW 18A
Model SIW ... (SIW 14A OR SIW 18A) → Seite 9
5.8 Setting forward or reverse rotation
Note
An interlock prevents switching while the motor is running.
The control switch is locked when the forward/reverse switch is in the
middle position (safety lock).
▶ Set the forward/reverse switch to the desired direction of rotation.
5.9 Screwdriving
WARNING
Risk of injury and damage. Screws/bolts or the workpiece may be
damaged by excessively high torque; this may also lead to serious injury.
▶ Ensure fastener and attachment will withstand the level of torque
generated by the tool.
1. Set the forward/reverse switch to the middle position or remove the
battery from the power tool.
2. Use the torque selector button to set the desired torque. → Seite 12
5.10 Switching on
▶ Press the control switch.
◁ Speed of rotation is regulated by the distance the control switch is
pressed in.
5.11 Switching off
▶ Release the control switch.
5.12 Removing the battery
▶ Remove the battery.
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
9
10
13