Hilti SID 14-A Original Operating Instructions page 19

6 Care, maintenance, transport and storage
6.1 Care and maintenance of the tool
WARNING
Electrical hazards! Improper repairs to electrical parts may lead to
serious injuries.
▶ Electrical parts may be repaired only by trained electrical specialists.
▶ Keep the tool, especially its grip surfaces, clean and free from oil and
grease. Do not use cleaning agents containing silicone.
▶ Never operate the power tool when the ventilation slots are blocked.
Clean the air vents carefully using a dry brush. Do not permit foreign
objects to enter the interior of the tool.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular
intervals.
6.2 Care of the Li­ion battery
▶ Keep the battery clean and free from oil and grease.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular
intervals. Do not use cleaning agents containing silicone.
▶ To achieve maximum battery life, stop drawing power from the battery as
soon as a significant drop in the performance of the power tool is noticed.
▶ Charge the batteries using the Hilti chargers approved for use with Li-ion
batteries.
6.3 Transport and storage
WARNING
Risk of fire! Risk of short circuiting.
▶ To avoid short circuits and associated heat generation, Li-ion bat-
teries should never be stored or transported in loose, bulk form and
without protective measures.
▶ Remove the battery before transporting or storing the impact screw-
driver/wrench.
14
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03