Hilti SID 14-A Original Operating Instructions page 11

▶ Check that accessory tools are compatible with the power tool's
chuck/drive system and that they are fitted and secured correctly.
▶ Make sure that the screws or bolts and the workpiece are suitable for
the level of torque generated by the power tool. Excessive torque may
overstress, stretch or strip the screws/bolts or damage the workpiece,
thus leading to hazardous situations.
Use and care of battery-powered devices
▶ Check that the tool is switched off before inserting the battery.
Inserting a battery into an electric tool that is switched on can lead to
accidents.
▶ Do not expose batteries to high temperatures and keep them away
from fire. There is a risk of explosion.
▶ Do not disassemble, squash or incinerate batteries and do not subject
them to temperatures over 80°C (176°F). This presents a risk of fire,
explosion or injury through contact with caustic substances.
▶ Avoid ingress of moisture. Ingress of moisture may cause a short circuit,
resulting in burning injuries or fire.
▶ Remove the battery before storing or transporting the power tool.
▶ Avoid short circuiting the battery terminals. Check that the battery
terminals and the terminals in the power tool are free from foreign
objects before inserting the battery in the tool. Short circuiting the
battery terminals presents a risk of fire, explosion and chemical burns.
▶ Do not continue to use or attempt to charge damaged batteries (e.g.
batteries with cracks, broken parts, bent or pushed-in/pulled-out
contacts).
▶ If the battery is too hot to touch it may be defective. In this case, place the
power tool in a non-flammable location, well away from flammable
materials, where it can be kept under observation and allowed to
cool down. Contact HiltiService after the battery has cooled down.
Electrical safety
▶ Before beginning work, check the working area (e.g. using a metal
detector) to ensure that no concealed electric cables or gas and
water pipes are present. External metal parts of the power tool may
become live, for example, when an electric cable is damaged accidentally.
This presents a serious risk of electric shock.
3 Description
3.1 Overview of the product
Hex. socket (SID)
@
Illumination
;
Forward/reverse selector
=
switch with safety lock
6
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
1
Control switch (with electronic
%
speed control)
Square drive (SIW)
&
Torque selector button
(
Belt hook (optional)
)