Electronic - Layout Of Components; Lead Lines Loch Speedo Sounder; View Interior; View Outside - Jeanneau MERRY FISHER 815 Owner's Manual

ELECTRONIC - LAYOUT OF COMPONENTS

View interior

LEAD LINES
The loch and depth sounder transducers are located in the engine compartment (Port
side). Keep the log sensor cowl close to the instrument so as to be able to intervene in
complete safety.
Do not store material on top of the sensors.
AUTO PILOT
The pilot consists of several elements listed as follows:
- Repeater in the cockpit starboard side above the engine panel.
- Compass and pilot calculator fixed to the starboard saloon aft partition.
- To supply power to all elements switch on the "Navigation" circuit breaker on the
electrical panel.
- For use and maintenance of the material consult the manufacturer instructions.
MAINTENANCE
Clean the transducer probe during each dry dock and the log sensor regularly. Read the
instructions for maintenance recommendations.
Refer to chapter 12 "Launching" for the precautions to be taken concerning the sensors
during hoisting.
- For optimal operation remove all metal objects from its close proximity.
- Do not store material close to the calculator and electrical connections.
ELECTRONIC

LEAD LINES LOCH SPEEDO SOUNDER

ADVICE - RECOMMENDATION
81/104

View Outside

8