Yealink VC110 Administrator's Manual page 91

default password, for the authenticator. The authenticator then forwards the credentials
to the authentication server for verification. If the authentication server determines the
credentials are valid, the endpoint is allowed to access resources located on the
protected side of the network.
The endpoint supports the authentication protocols EAP-MD5, EAP-TLS, PEAP-MSCHAPv2
and EAP-TTLS/EAP-MSCHAPv2 for 802.1X authentication.
For more information on 802.1X authentication, refer to
802.1X feature parameters on the endpoint are described below:
Parameter
Specifies the 802.1x
authentication mode.



802.1x Mode


Default: Disabled
Note: If you change this
parameter, the endpoint will
reboot to make the change take
effect.
Configures the user name for
802.1x authentication.
Note: If you change this
Identity
parameter, the endpoint will
reboot to make the change take
effect.
Configures the password for
802.1x authentication.
Note: If you change this
MD5 Password
parameter, the endpoint will
reboot to make the change take
effect.
Configures the access URL of the
CA certificate when the 802.1x
CA Certificates
authentication mode is
configured as EAP-TLS,
PEAP-MSCHAPV2 or
Description
Disabled
EAP-MD5
EAP-TLS
PEAP-MSCHAPv2
EAP-TTLS/EAP-MSCHAPv2
Configuring Network
Yealink 802.1X Authentication
Configuration Method
Remote Control
Web User Interface
Web User Interface
Web User Interface
Web User Interface
.
79