Default Layout Of Single Screen - Yealink VC110 Administrator's Manual

Administrator's Guide for Yealink VC110 Video Conferencing Endpoint
Parameter
To configure the SIP IP call by proxy via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of SIP IP Call by proxy.
3. Click Confirm to accept the change.
When only one display device is connected to the VC110 all-in-one unit (single screen),
you can configure the default screen layout when a call is established.
The parameters of default layout of single screen are described below:
Parameter
Default Layout of
single screen
140
Description
Default: Off
Description
Configures the default layout of
single screen when a call is
established.
Remote big Local small

Remote Full screen

Equal

Configuration Method
Configuration Method
Web User Interface