Extron electronics DXP HD 4K Series Setup Manual page 50

Command Function
IP Setup (continued)
Configure current port timeout
Read current port timeout
Configure global IP port timeout
Read global IP port timeout
Set verbose mode
Read verbose mode
Reset
System reset to factory defaults
NOTE: This command excludes IP settings such as IP address and subnet mask. It does not remove the file system.
Absolute system reset
NOTE: This command includes resetting the IP address to 192.168.254.254 and the subnet mask to 255.255.0.0. The firmware
version remains the same.
X5#
NOTE: = Verbose mode
X5*
= Port timeout interval
ASCII Command Response
(Host to Switcher) (Switcher to Host)
E X5* }
0* TC Pti0*
E } X5*]
0TC
E X5* }
1* TC Pti1*
E } X5*]
1TC
EX5# }
CV Vrb
E } X5#]
CV
E }
ZXXX Zpx
E }
ZQQQ Zpq
0 = clear or none (default for Telnet connection)
1 = verbose mode (default for RS-232 and USB connection)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
1 (10 seconds) – 65000 (default is 30 = 300 seconds = 5 minutes)
Additional Description
X5*]
X5*]
X5#]
]
Clear all ties and presets and reset unit
to factory default settings.
] Clear all ties and presets and reset unit
to factory default settings.