Extron electronics DXP HD 4K Series Setup Manual page 27

2. Press the desired input or output button.
NOTE: All input and output buttons can be used for
presets, even if they do not represent actual inputs or
outputs on the DXP.
DXP 44, 84, and 88:
The LED blinks red to indicate that this
preset is selected to save or recall.
1
Figure 19. Press an Input or Output Button to Select a
Preset (DXP 44, 84, and 88)
DXP 168 and 1616:
The button blinks red to indicate that
this preset is selected to save or recall.
1
ENTER
Figure 20. Press an Input or Output Button to Select a
Preset (DXP 168 and 1616)
Press the Enter button.
3.
The Enter LED blinks green
ENTER
to indicate the need to
activate the save or recall.
The Enter button blinks
green to indicate the need to
activate the save or recall.
DXP HD 4K Series • Operation 21