Control buttons — The four Control buttons have the
D
following functions:
•
•
•
•
16
DXP HD 4K Series • Operation
Enter button — The Enter button has three primary and
two secondary functions:
Primary:
Save changes made on the front panel.
•
Indicate that a potential tie has been created but not
•
saved.
Indicate that a global preset has been selected to be
•
saved or recalled but the preset action has not been
accomplished.
Secondary:
Select the baud rate for the Remote RS-232 port.
•
Set the front panel lock mode (executive mode).
•
Preset button — The Preset button has two primary
functions and one secondary function:
Primary:
Place the switcher in preset saving mode to save a
•
configuration as a preset, and in preset recalling mode to
activate a previously-defined preset.
Indicate when preset saving mode is active (blinks) and
•
when preset recalling mode is active (lights steadily).
Secondary:
Select the baud rate for the Remote RS-232 port.
•
<
View
button (DXP 168 and 1616 only) — The View
button has the following functions:
Primary:
Place the switcher in view-only mode to display the
•
current configuration.
Indicate that the DXP is in view-only mode.
•
Secondary:
Select the baud rate for the Remote RS-232 port.
•
>
Esc
button — The Esc
functions:
Primary:
Cancel operations or selections in progress and resets
•
the front panel button indicators.
Indicate that the escape function has been activated
•
(blinks once).
>
button has the following
<