Pro-Form 480 SpaceSaver User Manual page 10

9. Identify the Left and Right Upper Body Arms
(22, 23), which are marked with "Left" and
"Right" stickers, and orient them as shown.
Attach each Upper Body Arm (22, 23) with three
M8 x 12mm Patch Screws (84).
Orient the two Arm Covers (48) as shown. Slide
the Arm Covers onto the Upper Body Arms (22,
23) so that they cover the M8 x 12mm Patch
Screws (84). Note: The Arm Covers may
already be placed on the Upper Body Arms.
10. The Console (11) can use four 1.5V "D" batter-
ies (not included); alkaline batteries are recom-
mended. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components. Remove the screw, remove the
battery cover, insert the batteries into the bat-
tery compartment, and then reattach the battery
cover. Make sure to orient the batteries as
shown by the diagram inside the battery
compartment.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter. Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
9
48
22
84
84
10
Battery
Cover
Batteries
11
10
48
23
84
Screw
Batteries