Description Of The Ph-3N Srm Stud Welding Gun - Soyer BMK-8i Operating Manual

Description of the PH-3N SRM stud welding gun

9. Description of the PH-3N SRM stud welding gun
Figure 5: PH-3N SRM stud welding gun
The gun has a lift magnet. Before welding, the stud is lifted by a magnet and au-
tomatically lowered again for welding.
The height of the lift is also crucial for the weld result.
The lift height can be determined using the lift time with the aid of the stud welding
device. Also comply with Chapter "11.1.5 Setting the lift time (height of lift) in "Set-
up" mode" on page 52.
The height of lift is set using the adjusting wheel on the gun.
36
b
g
Item
a PH-3N SRM stud welding gun, gap welding gun with lifting magnet
b Shielding gas cap with SRM technology
c Trigger button
d Current and control cables for connecting to the stud welding device.
e Adjustment wheel for setting the height of lift/lift time
f SRM supply for connecting to the stud welding device.
g Gas supply for connecting to the stud welding device.
Operating Manual Soyer Bolzenschweißtechnik
a
c
f
Designation
e
d