The PH-9 SRM12 stud welding gun has a gas insert for each diameter of the stud
chuck:
•
•
•
•
The gas insert serves to optimise the gas flow and insulate the stud chuck from
the shielding gas cap.
.
8.1 Technical data of the PH-9 SRM12 stud welding gun
Technical data of the PH-9 SRM12 stud welding gun
M6: F06738
M8: F06739
M10: F06740
M12: F06741
i
The PH-9 SRM12 stud welding gun must only be operated with the stud
welding devices specified in the technical data.
Designation
Item no.
Welding process
Stud diameter
stud chuck
Stud length
Stud welding devices
Weight
Subject to technical changes
Operating Manual Soyer Bolzenschweißtechnik
Description of the PH-9 SRM12 stud welding gun
PH-9 SRM12 stud welding gun
P02276
•
Drawn arc stud welding (DA)
•
SRM welding process
M3 - M12 (depending on the stud welding device)
SRM stud chuck
Standard to 60 mm, special lengths possible on
request and with special accessories
The gun is approved for operation on the following
Soyer stud welding devices:
•
BMK-8i
•
BMK-12i
•
BMK-16i when using the adapter:
Control cable adapter: F06770/FA
Earth cable adapter: F06771/FA
Gas adapter: F06772/FA
1.3 kg without cable
31