Cleaning The Stud Welding Device - Soyer BMK-8i Operating Manual

6.6 Cleaning the stud welding device

Do not use aggressive cleaning agents for cleaning the device.
Make sure that cleaning waste is disposed of in an environmentally compatible
manner. Comply with the instructions of the cleaning agent manufacturer.
The frequency of cleaning depends on the conditions in which the stud welding
device is used.
DANGER
!
Hazards during cleaning
Improper cleaning of the stud welding device can endanger personnel.
• The device may only be cleaned by trained and qualified technicians.
• Prior to starting work, the stud welding device must be disconnected from
the mains and secured against being switched back on again.
• Work on electrical devices and modules may only be carried out by quali-
fied electricians in accordance with the electrotechnical codes of practice.
• Cleaning agents must not get into the device.
CAUTION CAUTION
device damage due incorrect cleaning
Improper cleaning can lead to damage of the device.
• No cleaning agents must get into the device.
• Do not use aggressive agents for cleaning.
Operating Manual Soyer Bolzenschweißtechnik
Description of the BMK-8i stud welding device
27