Settings - Soyer BMK-8i Operating Manual

11. Settings

The stud welding device and gun must be matched and adjusted for the respec-
tive processing.
11.1 Setting the welding parameters
How to set the welding parameters of the
•
•
•
•
•
is explained in the following.
To achieve an optimum stud welding result, it is necessary to carry out some sam-
ple welds with different settings.
The parameters to be set on the stud welding device also depend on the following
influencing factors:
•
•
•
•
11.1.1 Help tables for device setting
The values given in the following table can be useful as guide values for an initial
sample weld.
How the respective settings are made is explained in later chapters.
welding current
welding time
SRM current
gas preflow time and
lift time/height of lift
Material of the workpiece
Thickness of the workpiece
Material of the welding stud
Diameter of the welding stud
Operating Manual Soyer Bolzenschweißtechnik
Settings
47