Mechanical Instructions - Philips 221TE2LB/00 Service Manual

Preparation before disassemble
1.Clean the room for disassemble
2.Identify the area for monitor
3.Check the position that the monitors be placed and the quantity of the monitor ;prepare the area for material flow;
according to the actual condition plan the disassemble layout
4.Prepare the implement, equipments, materials as bellow:
1) Press-fixture
2) working table
3) Screw-driver
4) knife*1
5) glove
6) cleaning cloth
7) ESD protection
ite
m
1
2
3
Mechanical Instruction
picture Operation
Disassemble the base
Disassemble screws by
a screw-driver
disassembly the bezel
from the monitor, notice
the disassembly order :
1. Top parts of bezel
2. Left parts of bezel
3. Bottom parts of bezel
4. Right parts of RC
Don't draw the BZL
221TE2L LCD
Tool Notes
Screw-driver
When disassembly
the bezel ,notice don't
bend the C/B .man
must wear glove
The purpose is loose
the BZL
17