Philips 221TE2LB/00 Service Manual page 103

7.15 Movement of Unit with Base
Base must have non-marring, non-staining feet.
Unit must tilt up and down with no "Stick / Slip".
Base must provide sufficient friction to hold unit in desired position after adjusting tilt.
7.16 Kensington Lock
Must meet Kensington_slot.spec "TYE-M0004".
MMD request metal plate in Kinsington hole.
7.17 Wall Mount Method
VESA standard 100mm x 100mm
7.18 Label
Regulatory label / Carton label should follow Philips requirement.
China RoHS label.
Detail document refer to Philips Engineering Reference Book.
7.19 Product Dimension / Weight
Refer to Philips approved SHT 191/SHT560
Unit dimension (with stand) -
Packed unit dimension (carton) -
Net weight -
Gross weight -
7.20 Transportation
Transportation standards refer to UAN-D1534/00/01/02.
7.20.1.1 Transportation packages
Packaging and wrapping shall be sufficient to protect the product against damage or loss
during shipment from the supplier to the destination specified in the purchase order. All
packaging materials are subject to test and evaluation per UAN-D1534/00/01, UAN-D636
and UN-D1400.
General pallet requirement refer to wood packaging reqs SBMT-ISBM15-16-03-06.pdf.
The cushion material shall be constructed using EPS material.
The doggy hole is requested.
© MMD 2010
General Product Specification
221TE2L LCD 103
Page 40 of 45