Front view as shown
in Fig. 1.
Fig. 1
To use the height adjustment
Stand in Fig. 2.
Fig. 2
Step 1 :
Disconnect screw and push
up and down the the monitor
as shown in Fig. 3.
Step 2 :
1.
Lay the front bezel
down
on a soft area to
prevent it from getting
scratched, defaced, or
broken.
2.Remove the four screws
as shown in Fig. 5.
3.Remove the monitor
base from the monitor
as shown in Fig. 5.
Mechanical Instructions
Stand
Disconnect screw
Fig. 3
Fig. 4
4 SCREWs
Fig. 5
Step 3 :
Remove Front Bezel by "-" screw driver on click holes to dig the back
cover as shown in Fig. 7.
Front Bezel==>
Fig. 7
Plastic clip (left & right) can be released by "-" screw driver as shown in
Fig. 8 & 9 .
Fig. 8
Fig. 9
Step 4 :
Remove front bezel as shown in Fig. 10.
HP L2335
Go to cover page
Fig. 6
Fig. 10
11