Philips 221TE2LB/00 Service Manual page 95

To make it easier for the user to memorize where analogue TV channels are stored in the preset list,
the analogue TV channels must be stored at a preset number as specified below:
Preferably the analogue TV channels should be stored contiguously at preset numbers below
100, starting at a multiple of 10 plus 1 (for instance 51).
If the above rule cannot be applied the analogue TV channels should be stored contiguously
at preset numbers starting at a multiple of 100 plus 1 (for instance 201).
4.4.10 Reinstall
The end user shall be able to initiate a manual service installation, meaning that tuning parameters of
a multiplex must be entered manually and the service lists will be updated according to the SI data
received via this multiplex. Sorting of the existing service lists will be maintained.
The end user shall be able to initiate a service update installation, meaning that the existing service
lists will be updated according to SI data received during a new scan. Sorting of the existing service
lists will be maintained.
A new country selection shall have no effect on the sorting of services in an existing service list. Only
a service re-installation will sort the services based on the new country selection.
The end user shall be able to move individual services in a user selectable service list.
The end user shall be able to delete and undelete individual services from a user selectable service
list.
The end user shall be able to select a specific user selectable service list (for instance the user
selectable service list containing all digital tv services or the user selectable service list containing all
digital radio services). The end user can only select services from the selected user selectable
service list.
End user shall be able to tag and un-tag a service as 'favourite'.
4.4.11 Maintaining Service Lists
A service update installation shall update the MSL and PSL. The rules for upating the MSL are
described in the MSL section and the mapping from teh MSL to PSL is independed of update install
or initial install.
4.4.12 Automatic Maintenance Of Service Lists
Over time networks will evolve, as more areas will be covered for reception of digital terrestrial
television and more services will be provided. The receiver must be able to keep in sync with
changes in the network.
Main objective is to add new services, available for the end user, to the service list instantly without
user interaction.
When a specific transport stream is tuned to by the user, a new TSSL will be created and merged
into the MSL
Service installation shall initiate a service update installation on a regular basis which is not intrusive
for the end user. This action is performed once per 24 hours maximum, when the tuner/demodulator
hardware for the digital signal path is not in use by the end user (for instance just after switching to
standby). The service update installation is aborted immediately when the end user selects a digital
service.
4.5 InstallATION (ATV)
Virgin mode install (wizard to select country, language...auto store): Virgin mode is invoked when the
set is first time powered on or keep pressing "menu" key for 5 seconds. It will guide the user through
the installation. Country selection is the first step, secondly language selection is guided accordingly.
ATS is carried out according to selected country and ACI would refer to selected language.
Language of virgin mode is default at English.
© MMD 2010
General Product Specification
221TE2L LCD 95
Page 32 of 45