Philips 221TE2LB/00 Service Manual page 101

7 MECHANICAL
7.1 Cosmetic
Philips ID
7.2 Mechanical Data Files
ProE files required, with architecture in part and assembly from vendor.
7.3 Location of Philips Logo
Per Philips make-up sheet
7.4 Location of Icons
Per Philips make-up sheet
Color for Resin / Paint
7.5
Per Philips make-up sheet
Gap between panel and front bezel
7.6
< 1.2(typ.) mm
Slant on front bezel
7.7
4.0MM
7.8 Fire enclosure request
-Shielding Cover should fulfill international standard
7.9 Resins
RoHS requirements.
WEEE requirements.
Resin type/selection refer to "Plastic-Philips Pool monitor".
© MMD 2010
General Product Specification
221TE2L LCD 101
Page 38 of 45