Philips 221TE2LB/00 Service Manual page 71

3.1 POWER
3.1.1 POWER SUPPLY FEATURES
AC line voltage range -
AC line frequency range -
DC tact switch -
Inrush current -
Leakage current -
Power factor correction -
3.1.2 POWER CONSUMPTION & MEASURE THE FOLLOWING VOLTAGE
Normal on(2 lamp) –
Normal on (4lamp)-
Power Saving (VGA only)--
Standby (DC off, Press RC Power Key)- < 0.5W, RC standby mode + RED LED
Power off (Press Key BD Power key)-
3.1.3 POWER MODE
Power Off mode:
Standby mode:
TV mode:
PC mode:
Power Saving mode:
Wake Up keys:
© MMD 2010
General Product Specification
90Vac ~ 264Vac.
50/60 Hz 3 Hz.
Minimal power consumption when switch off.
< 40A at 240Vac when cold start.
< 0.5mA at 240Vac.
According to EN61000-3-2
On mode (MAX): w/audio 1Khz,Volume=100 , 40Watt
On mode (Typ.) w/o audio , 32Watt
On mode (MAX): w/audio 1Khz,Volume=100 , 55Watt
On mode (Typ.) w/o audio , 45Watt
< 0.5W, RC standby mode + LED Off
The mains plug is not connected or, the power supply is switched off. The
system has no power available.
The TV signal processing hardware is switched off. The micro-controller
is operating and waiting for a command
The LCD display is switched on. The TV set is tuned to a channel or
external source. The micro-controller is processing all incoming signals
and commands and also controls the TV hardware.
The system is displaying PC video input.
The system is the same as Standby mode as there is no PC video when
system is in PC mode.
Key: CH+, CH-, Power
RC: CH+, CH-, Power
< 0.5W, RC standby mode + RED LED
221TE2L LCD 71
Page 8 of 45