Set Gs1 Databar (Formerly Rss) Parameters; Print Gs1 Databar (Formerly Rss), Data Length Specified; Note: Data Length Specified 1 To 2436 Via Integer Nh : Nl - CognitiveTPG A776 ColorPOS Programming Manual

Set GS1 DataBar (formerly RSS) parameters

Setting of parameters for GS1 Databar.
ASCII GS q a b c d e fL fH
Hexadecimal
1D 71 a b c d e fL fH
Decimal
29 113 a b c d e fL fH
a byte
b byte
c byte
d byte
e byte
f word
Note: For GS1 DataBar commands, consult ISO/IEC 24724. For further information, visit www.gs1.org.

Print GS1 DataBar (formerly RSS), data length specified

ASCII GS k m nL nH d1... dn
Hexadecimal
1D 6B m nL nH d1... dn
Decimal
29 107 m nL nH d1... dn
m
61
62
63
64
65
66
67
68
69
6A
6B
6C

Note: Data length specified 1 to 2436 via integer nH : nL.

A776-PG00001 D 07/13
pixels per minimum unit, default 3, minimum 2, maximum 6 (value a applies
to parameters b, c, d)
X undercut, default 0, can be set 0 to a-1
Y undercut, default 0, can be set 0 to a-1
separator height, default a, can be set a to a*2
segment width, used only by GS1 DataBar Expanded, default 22, must be
even number 2 to 22
line height, used only by UCC128, default 25, can be set 1 to 500
Type
GS1 DataBar
GS1 DataBar truncated
GS1 DataBar stacked
GS1 DataBar stacked omni-directional
GS1 DataBar limited
GS1 DataBar expanded and expanded stacked
UPC-A
UPC-E
EAN-13
EAN-8
UCC/EAN-128 with CC-A or CC-B
UCC/EAN-128 with CC-C
Chapter 5: Programming commands
A776 (B780) Programming Guide
99