Form And Merge Real-Time Surround Graphic (Colorpos ® ); Save Graphics Buffer As Logo (Colorpos ) - CognitiveTPG A776 ColorPOS Programming Manual

66 Chapter 5: Programming commands
Save graphics buffer as logo (ColorPOS
ASCII
GS 0x91 n
Hexadecimal 1D 91 n
Decimal
29 145 n
This command will save all the raster data that is in the working graphics buffer (where surround graphics are formed)
as a logo with index value n. This logo can then be used repeatedly for inserting different text. See the background
logo print command.
There is one working graphics buffer in the printer; its size (and that of the saved logo) is of maximum print width size,
and of sufficient length to store the largest of the surround graphic styles defined since the last buffer "freeze" event.
This command is ignored if the graphics buffer is not in a "merge pending" state. The graphics buffer state will be set to
"frozen" by this command.
Related information
This command is ignored in page mode.
Background logo print mode (ColorPOS
ASCII
GS 0x92 n
Hexadecimal 1D 92 n
Decimal
29 146 n
This command will place into the graphics buffer the logo designated by n. As soon as there is a print action command
(such as text output) the graphics buffer will be merged (logical OR process) with print output.
This command sets the graphics buffer state to "merge pending", functioning and performing the save as in the form
and merge real time surround graphics command.
Related information
This command is ignored in page mode.
A776 (B780) Programming Guide
)
®
)
®
A776-PG00001 D 07/13