CognitiveTPG A776 ColorPOS Programming Manual page 126

114 Chapter 5: Programming commands
ESC w p 18 X A <CR>
• Maximum 18 characters in the account number with spaces and dashes removed
• Final Carriage Return
ESC w p 18 x A <CR>
• Maximum 18 characters in the account number with spaces and dashes replaced with 0
• Final carriage return
ESC w p 018 A <CR>
• Always 18 characters in the account number (high order zero-filled if necessary)
• Final carriage return
ESC w p 018 X A <CR>
• Always 18 characters in the account number with spaces and dashes removed
• Final carriage return
ESC w p 018 x A <CR>
• Always 18 characters in the account number with spaces and dashes replaced with 0
• Final Carriage Return
ESC w p T 18 X A 04C <CR>
• All characters in the transit number
• All characters in the account number (up to 18) with spaces and dashes removed
• Always four characters in the check number (zero-filled if check number is only three characters long)
• Final carriage return
ESC w p K9 X T 18 X A 04C <CR>
• U.S. check: all nine characters in the transit number (because there are no dashes)
• Canadian check: dash in transit number removed; "9" inserted at beginning, resulting in a fully numeric nine
character transit number
• All characters in the account number (up to 18) with spaces and dashes removed
• Always four characters in the check number (zero-filled if check number is only three characters long)
• Final carriage return
ESC w p T '/ A '/ C '/ S <CR>
• All characters in the transit number
• Field separator: /
• All characters in the account number
• Field separator: /
• All characters in the check number
• Field separator: /
• Two-digit status
• Final carriage return
Continued . . .
A776 (B780) Programming Guide A776-PG00001 D 07/13