Configure Use Of Font Set; Configure Line Spacing; Select Superscript Or Subscript Modes - CognitiveTPG A776 ColorPOS Programming Manual

Configure use of font set

ASCII
US ETX 0x45 FSID
Hexadecimal 1F 03 45 FSID
Decimal 31 03 69 FSID
Value of FSID: font ID
00 = 24 high
01 = Tall font
02 = Color POS font
03 - 0xFF (user configurable) = paper-saving font (18 high)
This command configures a font set to be used all of the time (over power cycles).

Configure line spacing

ASCII US ETX 0x46 n
Hexadecimal
1F 03 46 n
Decimal
31 03 70 n
Value of n: 1-byte #dot rows per print line
1 = 6 dpi
2 = 6.77 dpi
3 = 7.52 dpi
4 = 8.13 dpi
This command configures the line spacing for resident and downloaded font sets.
Five Asian Fonts are available for use on the A776 printer:
Simplified Chinese, Traditional Chinese, Kanji, Korean and Thai. Only one of the Simplified Chinese, Traditional Chinese,
Kanji, or Korean can be downloaded to the printer at one time.
New users of the Simplified Chinese font must first contact CognitiveTPG Sales Department for assistance.
The Thai font (Code Page 874) is available for download to permanent font flash. Contact CogntiveTPG for assistance.
The commands needed for downloading the fonts are described below in the order of use. Before downloading
Simplified Chinese, Traditional Chinese, Kanji, or Korean , the expanded flash memory allocation must be set up to
expand the size of the permanent font space. For Simplified Chinese, 2.2 Meg of space is required. Traditional Chinese
requires 1.3 Meg. Kanji requires 1 Meg, and Korean requires of 1 Meg of space in the permanent font area.

Select superscript or subscript modes

ASCII
US ENQ n
Hexadecimal 1F 05 n
Decimal
31 05 n
Value of n: 0 = Normal character size
1 = Select subscript size
2 = Select superscript size
Default: 0 (normal size)
Turns superscript or subscript modes on or off. This attribute may be combined with other characters size settings
commands (12, 13, 1B 21 n, 1D 21 n,...)
This command is available only on the receipt station.
Exceptions
This command is ignored if n is out of the specified range.
A776-PG00001 D 07/13
Chapter 5: Programming commands
A776 (B780) Programming Guide
55