Select Printing Position Of Hri Characters; Select Pitch Of Hri Characters; Select Bar Code Height - CognitiveTPG A776 ColorPOS Programming Manual

96 Chapter 5: Programming commands

Select printing position of HRI characters

ASCII
GS H n
Hexadecimal 1D 48 n
Decimal
29 72 n
Value of n:
Printing position
0 = Not printed
1 = Above the bar code
2 = Below the bar code
3 = Both above and below the bar code
Default:
0 (Not printed)
Prints HRI (human readable interface) characters above or below the bar code.

Select pitch of HRI characters

ASCII
GS f n
Hexadecimal
1D 66 n
Decimal 29 102 n
Value of n:
0 = Standard pitch at 15.2 CPI
1 = Compressed pitch at 19 CPI
Default: 0 (Not printed)
Selects standard and compressed font for printing bar code characters.
When slip is selected as the interface, HRI is always compressed.

Select bar code height

ASCII
GS h n
Hexadecimal 1D 68 n
Decimal
29 104 n
Value of n:
Number of dots
Range of n: 1–255 (decimal)
Default:
162 (decimal)
Sets the bar code height to (n/154") for receipt and
.
A776 (B780) Programming Guide
01-FF (hexadecimal)
A2 (hexadecimal)
(n/172") for slip
A776-PG00001 D 07/13