Table of Contents
Advertisement
Figure 59 Liebert BDC connection to UPS
See
Detail B
23.6" (600mm)
78.7"
(2000mm)
MBB
BIB
System
Input
Bus
UAM06020A
FRONT
Rev. 0
(Door Removed)
NOTES
1. All Emerson-supplied cable must be repositioned prior to and while the cabinets are being placed
in their final installed location.
2. All interconnection hardware supplied by Emerson.
3. AC connections must be made to the UPS module before attaching Liebert BDC to UPS module.
4. All cabling will be field-supplied when a Liebert BDC is configured as a stand-alone cabinet.
5. Liebert BDCs must attach to the right side only of the Liebert APM.
6. Refer to the individual drawing of each piece of equipment for additional details.
37.5" (953mm)
2.2" (56mm)
Typ. 6 Places
2.36"
(60mm)
Typ. 2
RIGHT SIDE
Places
(Panel Removed)
LDB
MIB
See Detail A and
Isometric View
Detail B, Page 2
(See Note 6)
Links for Main
to Bypass
(Single Input Only)
1.97" (50mm)
Typ. 3
Places
DETAIL B
Input
Breaker
Input
Ground
Bus
System Input
Busbar
Located at
Rear, Typ.
System Input
Connections
75
Installation Drawings
Main Input
Busbars
Bypass
Busbars
Ground
See Detail C
Output
Busbars
DC Busbars
See Detail D
UAM02021
Rev. 3
Neutral Input
Connections
DETAIL B
UAM06020B
Iso View, Front Left
Corner Post Removed
Rev. 0
®
Liebert
™
APM
Advertisement
Table of Contents
