Samsung SPC-7000 User Manual page 20

control
Runs the Focus Near/Far motion.
[FOCUS N/F] +
- [FOCUS N/F] +
[FOCUS N/F] +
- [FOCUS N/F] +
Runs the IRIS Open/Close operation.
[IRIS C/O] +
- [IRIS C/O] +
[IRIS C/O] +
- [IRIS C/O] +
When you click a number + [PRESET] button, the preset corresponding to
[PRESET]
each button number is activated.
When you click a number + [GROUP] button, Group/Scan corresponding to
[GROUP]
each button number is activated.
When you click a number + [TRACE] button, Pattern/Trace corresponding to
[TRACE]
each button number is activated.
Runs the zoom in motion.
[ZOOM] +
Runs the zoom out motion.
[ZOOM] +
Uses the left/right button of the mouse in mouse mode.
[L(T. LOCK)]/[R(TRACK)]
20_ control
PTZ control
: Focus Near
: Focus Far
: IRIS Open
: IRIS Close
Mouse control
Screen control
You can change the multi monitor selection by clicking a number + [MON.
(CON.)] button in the screen mode (previous/next according to the monitor
[MON.(CON.)]
number).
When you click a number + [LAYOUT (SEQ.)] button, the layout corresponding
[LAYOUT(SEQ.)]
to each button number is activated.
When you click a number + [CAM] button, the camera corresponding to each
[CAM]
button number is activated.
Clicking once will display a single screen on the live viewer.
Clicking once again will return to the original screen.
[ENTER]
When you click a number + [ENTER] button in the live viewer, the screen is
split into the number input.
Captures the video of the current tile.
LCD SnapShot Button
Initializes the event.
LCD UI Alarm Off Button
Moves to the tile corresponding to the number.
number + [TILE(VM)]
Mode Change
Changes the PTZ mode.
[PTZ(MENU)] Click the [PTZ (MENU)] button while in PTZ mode and the screen mode will be
changed.
Changes the mouse mode.
Click the [SHIFT] + [MENU (Mouse)] buttons while in mouse mode and the
[SHIFT] + [MENU(Mouse)]
screen mode will be switched.
Changes the console mode.
[SHIFT] + [Mon.(Con.)]
Runs the VMD control.
[SHIFT] + [TILE(VM)]