You can select whether to enable/disable the
auto tracking function of a camera that supports
You can turn the forced alarm output ON/OFF.
If you don't have the proper user authority, synchronization with the camera may fail.
If you want to control PTZ with the joystick, turn this function ON, otherwise, turn it OFF.
camera Screen capture
When you press the <Screenshot> button, a camera screenshot will be saved to the USB
Detailed camera information
Press the <information> button and detailed camera information will be displayed.
controL StoraGe DeviceS
As functions vary depending on the device, please refer to the user manual for the device.
You can control the storage devices registered in
the SSM by selecting the SSM.
When you select the SSM, the camera will
run in SSM mode.
Select a mode
Select the <SSm>.
You can control the SSM and devices registered in the SSM.
Controls the SSM regardless of the GUI control.
For detailed information about how to use the SSM program, please refer to the user manual.
In PTZ mode, you can control the Pan and Tilt motion.
In Screen mode, you can change the Up/Down/Left/Right tile selection.
In Mouse mode, you can move the mouse cursor.
In PTZ mode, the screen zooms in when turning in the WIDE direction, and
zooms out when turning in the TELE direction.